BT Internet Radio: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (→User Manual) |
||
Line 44: | Line 44: | ||
==Power Supply Unit== | |||
Supplied with a 7.5V @ 1.2A switched mode mains power adapter. DC power plug specifications are: 5.5mm diameter/2.1mm inner diameter/14mm long, centre positive polarity. If you are sourcing a replacement, note that a short 9mm length plug will NOT fit this radio properly. | |||
==How to add remote control to the BT Internet Radio== | ==How to add remote control to the BT Internet Radio== | ||
http://logikir100.tripod.com/irmod.htm | http://logikir100.tripod.com/irmod.htm |
Revision as of 14:33, 12 May 2010
Introduction
This radio first appeared in late 2006.
Pictures
Photos reproduced with the permission of Logikir100.tripod.com
Opening the BT Internet Radio
This is one of the easier radios to open.
- Remove the 4 recessed screws from the back of the case.
- Turn the radio upside down and carefully separate the two halves of the case by no more than 1 to 2 inches.
- Look inside and you will see 3 red/black cables near the bottom of the case. Carefully detach them from the main circuit board.
- You can now fully open up radio.
Firmware
v255-c-194 - circa 2006
No official upgrades available as of April 2010.
User Manual
http://www.shop.bt.com/content/uni2/documentation/4bdq/028983.pdf
Power Supply Unit
Supplied with a 7.5V @ 1.2A switched mode mains power adapter. DC power plug specifications are: 5.5mm diameter/2.1mm inner diameter/14mm long, centre positive polarity. If you are sourcing a replacement, note that a short 9mm length plug will NOT fit this radio properly.