Main public logs

Combined display of all available logs of Sharpfin. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 13:21, 8 June 2025 Philipp talk contribs created page File:LCD-playback.jpg
• 13:21, 8 June 2025 Philipp talk contribs uploaded File:LCD-playback.jpg
• 13:19, 8 June 2025 Philipp talk contribs created page LCD display (Created page with "== Overview == The Reciva radios support a range of LCD displays, from 2 line text displays to much larger graphical displays. Some displays/radios have features such as adjustable brightness and contrast, and settable icons and LEDs, and others do not. The sharpfin project has provided the Libreciva interface library, which is written in two halves (a low level hardware access library - lcdhw.c/lcdhw.h, and a higher level interface library - lcd.c/lcd.h). == Usa...")
• 13:14, 8 June 2025 Philipp talk contribs created page Keys (Created page with "== Overview == The Libreciva key function provides access to the Reciva keyboard. In order to use the library function, you must include the header file: <syntaxhighlight> #include "key.h" </syntaxhighlight> === struct key_handler *key_init() === This function must be called to initialize the keyboard interface. It returns a handle structure, which must be used whenever the keyboard is polled with key_poll(). === int key_poll(struct key_handler *eh, struct key...")
• 13:12, 8 June 2025 Philipp talk contribs created page File:JTAG-SM.png
• 13:12, 8 June 2025 Philipp talk contribs uploaded File:JTAG-SM.png
• 13:11, 8 June 2025 Philipp talk contribs created page JTAG Port (Created page with "''' Thanks to rdk, the JTAG port has been identified - this page is no longer required ''' Bottom view of Barracuda module with probable JTAG pins: . . O ??? O TMS/TDI . . . O TDI/TMS . . . O ??? O ??? = Diagnostic = Presently, a possible location for the JTAG port has been identified, but which pin is which has not. JTAG consists of 4 or 5 pins: * TRST - A Reset line. * TDI - Data In * TDO - Data Out * TMS - The...")
• 13:09, 8 June 2025 Philipp talk contribs created page File:Ir100 608mr7.pcb.jpg
• 13:09, 8 June 2025 Philipp talk contribs uploaded File:Ir100 608mr7.pcb.jpg
• 13:09, 8 June 2025 Philipp talk contribs created page File:IR100-Motherboard-Layers.jpg
• 13:09, 8 June 2025 Philipp talk contribs uploaded File:IR100-Motherboard-Layers.jpg
• 13:09, 8 June 2025 Philipp talk contribs created page IR100 (Created page with "== Radio == The IR100 contains 3 PCBs, the power converter PCB, the Amplifier PCB and the barracuda host PCB, into which is plugged a barracuda module, and a RaLink USB wi-fi adaptor. There is an [http://logikir100.tripod.com/Logik.htm external owners site] with lots of IR-100 information. == Radio Firmware/Software Modifications == Several owners have used this project to change the firmware on their radios, providing additional features over the official upgrades....")
• 13:08, 8 June 2025 Philipp talk contribs created page IR100 Back Rotation (Created page with "The IR100 suffers from speaker hum due to the transform(er) interfering with the speaker. Its not surprising if one puts a transform(er) right next to a speaker's coil. Looking at the back of an IR100, its is fairly obvious that its been put on the wrong way round. The bass-reflex port should be into the rear of the speaker; its beautifully moulded to interface with the rear of the speaker magnet. The question is why it was assembled this way ? Best guess is...")
• 13:04, 8 June 2025 Philipp talk contribs created page Introduction (Created page with "= Introduction = The goal of this project is to gather information about the Reciva 'Barracuda' radio module, in order to understand enough of the hardware to be able to provide alternative firmware. We are <i>not</i> interested in reverse-engineering or hacking the Reciva applications, only in running our own software on the device. I'm an embedded firmware engineer, and I'm planning to spend some time on this project to see how hard it would be to get my own softwar...")
• 13:03, 8 June 2025 Philipp talk contribs created page Installing an Infrared Remote Control on the IR100 (Created page with "This applies to all Reciva radios, not just the IR100. For a remote control to work there must be a suitable IR sensor fitted and a lircd configuration file. That's it! === Adding a sensor === For radios that don't already have an IR sensor some hardware modifications will be required to add one in the case where it will be visible. Almost any IR decoder that will run from a 3.3V supply should work, these devices remove the 38kHz carrier and output a logic signal th...")
• 13:01, 8 June 2025 Philipp talk contribs created page Moving the USB Wi-Fi dongle on the IR100 (Created page with "= Preparation = This page describes how to install an external USB socket on the IR100. Note that this involves taking your radio to pieces and cutting the box, it also may involve some soldering, depending on which USB hub device you can find. <center><b>OPENING YOUR RADIO IS AT YOUR OWN RISK, AND WILL INVALIDATE YOUR WARRANTY</b></center> thumb|Installing an external USB socket on the IR100 (Click for a full-sized version)...")
• 12:59, 8 June 2025 Philipp talk contribs created page File:Ir100-install-external-usb.jpg
• 12:59, 8 June 2025 Philipp talk contribs uploaded File:Ir100-install-external-usb.jpg
• 12:59, 8 June 2025 Philipp talk contribs created page Installing an External USB Socket on the IR100 (Created page with "= Preparation = This page describes how to install an external USB socket on the IR100. Note that this involves taking your radio to pieces and cutting the box, it also may involve some soldering, depending on which USB hub device you can find. <center><b>OPENING YOUR RADIO IS AT YOUR OWN RISK, AND WILL INVALIDATE YOUR WARRANTY</b></center> thumb|Installing an external USB socket on the IR100 (Click for a full-sized version)...")
• 12:56, 8 June 2025 Philipp talk contribs created page File:IR100-ethernet-fitted.jpg
• 12:56, 8 June 2025 Philipp talk contribs uploaded File:IR100-ethernet-fitted.jpg
• 12:56, 8 June 2025 Philipp talk contribs created page File:IR100-ethernet-holes.jpg
• 12:56, 8 June 2025 Philipp talk contribs uploaded File:IR100-ethernet-holes.jpg
• 12:55, 8 June 2025 Philipp talk contribs created page File:IR100-with-USB-hub-and-ethernet.jpg
• 12:55, 8 June 2025 Philipp talk contribs uploaded File:IR100-with-USB-hub-and-ethernet.jpg
• 12:54, 8 June 2025 Philipp talk contribs created page File:USB100TX-board-underside.jpg
• 12:54, 8 June 2025 Philipp talk contribs uploaded File:USB100TX-board-underside.jpg
• 12:54, 8 June 2025 Philipp talk contribs created page File:USB100TX-inside.jpg
• 12:54, 8 June 2025 Philipp talk contribs uploaded File:USB100TX-inside.jpg
• 12:53, 8 June 2025 Philipp talk contribs created page File:USB100TX-outside.jpg
• 12:53, 8 June 2025 Philipp talk contribs uploaded File:USB100TX-outside.jpg
• 12:52, 8 June 2025 Philipp talk contribs created page File:Ir100 back.jpg
• 12:52, 8 June 2025 Philipp talk contribs uploaded File:Ir100 back.jpg
• 12:51, 8 June 2025 Philipp talk contribs created page Installing an Ethernet LAN connection (Created page with "I've choosen an Ethernet-Lan-Adaptor from Faraloon(NetLINE) [USB10/100 Ethernet Adapter] It uses a pegasus chip. Image:ir100_back.jpg To add a ethernet adapter: * ... will be continued (; --Tim 23:02, 5 March 2008 (CET) ---- Another IR100 was fitted with a Linksys USB100TX ethernet adaptor (released in 1999, £4 inc postage from eBay). This uses the Pegasus chip that works straight out of the box with no modifications to the Reciva firmware...")
• 12:50, 8 June 2025 Philipp talk contribs created page File:Sharpfin water.png
• 12:50, 8 June 2025 Philipp talk contribs uploaded File:Sharpfin water.png
• 12:41, 8 June 2025 Philipp talk contribs created page File:Imp main bottom.jpg
• 12:41, 8 June 2025 Philipp talk contribs uploaded File:Imp main bottom.jpg
• 12:40, 8 June 2025 Philipp talk contribs created page File:Imp button composite.jpg
• 12:40, 8 June 2025 Philipp talk contribs uploaded File:Imp button composite.jpg
• 12:39, 8 June 2025 Philipp talk contribs created page File:Imp button bottom.jpg
• 12:39, 8 June 2025 Philipp talk contribs uploaded File:Imp button bottom.jpg
• 12:39, 8 June 2025 Philipp talk contribs created page File:Imp button top.jpg
• 12:39, 8 June 2025 Philipp talk contribs uploaded File:Imp button top.jpg
• 12:38, 8 June 2025 Philipp talk contribs created page File:Imp amp bottom.jpg
• 12:38, 8 June 2025 Philipp talk contribs uploaded File:Imp amp bottom.jpg
• 12:38, 8 June 2025 Philipp talk contribs created page File:Imp amp top.jpg
• 12:38, 8 June 2025 Philipp talk contribs uploaded File:Imp amp top.jpg
• 12:35, 8 June 2025 Philipp talk contribs created page File:Imp main top.jpg
• 12:35, 8 June 2025 Philipp talk contribs uploaded File:Imp main top.jpg